Adhesives for the future development direction

Over the next 5 to 10 years, China's consumption will continue to be adhesive to 8% to 10% of the rate of growth in the direction of development are as follows:

1. Low formaldehyde emission urea-formaldehyde glue

China's synthetic adhesive or about 30% of the total, with the improvement of people's lives, to enhance the awareness of environmental protection, man-made sheet of the environmental protection requirements will be higher, the low formaldehyde emission urea-formaldehyde glue market has great potential. At present, foreign companies in China producing low-formaldehyde emission urea-formaldehyde glue, at the same time supporting the establishment of large-scale wood processing plants.

2. Hot-melt adhesives

Do not use organic flux, and rapid construction, the bonding effect, in recent years, China's demand for the fastest-growing types of plastic, but also the future development direction. In addition to traditional EVA hot-melt adhesives, also need to develop domestic polyester, polyamide hot melt of the new varieties.

3. Polyurethane adhesive

Widely used in shoe-making, packaging, construction, automotive and other fields, but also because of its excellent performance, is considered the most promising one of the types of plastic. In developed countries, with plastic footwear all polyurethane adhesives, packaging films combined with the use of polyurethane adhesives, and adhesive tape, and other special polyurethane adhesive used, we can see a wide range of applications.

4. Silicone adhesive

In developed countries, the use of the main building sealed silicone sealant in the next few years, silicone sealant will be used in construction of China's leading plastic sealant species.

5. High-performance epoxy glue

Electronics industry with epoxy adhesive, epoxy structural adhesive used in the construction industry, production technology is difficult, the poor quality of domestic products, mainly rely on imports. In the future in this area is estimated that domestic consumer demand much higher than the average growth rate of frost.

6. Automotive plastic PVC plastic melting

PVC plastic melt glue is the main vehicle sealant, or about my car with adhesive 1 / 3 of the current annual demand of about 10,000 tons, with China's automobile industry in particular the car industry, PVC plastic melt glue must Broad prospects for development.