China's output of adhesives and sealants will be in the world

Experts predicted that China's adhesives and sealants in 2010 showed that the expected goal, then China's output of adhesives and sealants will be No. 1 in the world, sales will be 3 in the world. Experts predict that China's adhesive production in 2010 will reach 7,300,000 tons, to maintain an average annual growth rate of 11.5 percent; sales of 57,000,000,000 yuan, to maintain an average annual growth rate of 11.8 percent.
Environmentally friendly, energy-saving adhesive in the next five years will focus on the development. Experts said, high-performance plastic resin, and the electronics industry with epoxy resin adhesive, epoxy structural adhesive used in the construction industry, production technology is difficult, the poor quality of domestic products, mainly rely on imports in the future of domestic consumer demand in this area Much higher than the average growth rate will be made in five years gradually. Another type of adhesive 5 will also be hot spots: the low formaldehyde emission urea-formaldehyde glue, hot-melt adhesives, polyurethane adhesives, silicone adhesives, automotive plastic PVC plastic melt. At the same time, China will vigorously develop high-tech research and development and content, high value-added, high-performance adhesive products mainly include: water-based polyurethane adhesives, water-based adhesive neoprene-type, high-performance and high-quality products and pressure-sensitive adhesive, VAE (vinyl acetate - vinyl) latex, EVA (ethylene - vinyl acetate) resin, SIS (styrene - isoprene - styrene) resin, and so on.
Water-borne and water-based polyurethane adhesive chloroprene rubber adhesive is a type of environmentally friendly products in recent years in Europe and the United States, Japan and other industrialized countries, the development of fast, and has been widely used in construction, furniture, shoe-making industries, while the technology in the China is still a blank. Therefore the next 5 years China will increase not only the two types of adhesive research and development efforts, but also plans to introduce advanced foreign technology and production technology, building 5,000 tons / year of water-based polyurethane adhesive production in order to resolve some of the domestic market demand. In the high-performance and high-quality products and pressure-sensitive adhesive, China plans to build 5,000 tons / year of high-performance high-quality acrylic pressure-sensitive adhesive coating plant and the production line.
VAE emulsion is a water-based adhesives in one of the good kind of plastic. VAE emulsion of China's 2004 output was only 100,000 tons, far from enough to meet market demand, 5 year plan to build 100,000 tons / year of production equipment. Is an environment-friendly hot melt adhesives, in 2004 China's output of about 60,000 tons, annual output in 2010 is expected to reach 160,000 tons, but production of the main raw material for plastic resin EVA China's total dependence on imports, so China plans to build 10 10,000 tons / year EVA resin production equipment to address the development needs of the hot-melt adhesives. SIS is the production of hot-melt pressure-sensitive adhesive resins and adhesives other important raw materials, while China's annual output of only about 5,000 tons of production equipment, regardless of quality or quantity falls far short of demand in the domestic market, plans for the future construction of 30,000 T / SIS resin production.